# What Comes After 1 2 On A Tape Measure?

## What comes after a half inch?

The markings on a standard ruler represent the fractions of an inch.

The markings on a ruler from the start to the 1″ mark are: 1⁄16“, 1⁄8“, 3⁄16“, 1⁄4“, 5⁄16“, 3⁄8“, 7⁄16“, 1⁄2“, 9⁄16“, 5⁄8“, 11⁄16“, 3⁄4“, 13⁄16“, 7⁄8“, 15⁄16“, and 1”..

## What is 2 on a tape measure?

Put simply 1 = 1″, 2 = 2″ and so on. Between those numbers are a series of shorter marks which represent fractions of an inch. The mark directly in the middle of the inch denotes a measurment of 1/2″ whilst the markings either side of it represent measurements of 1/4″ and 3/4″ respectively.

## How many ¼ inch marks total are in 1 inch?

four ¼ inchThere are four ¼ inch segments per inch of the ruler. Like four quarters equal a dollar, four ¼ inch segments equal one whole inch.

## Where is CM in tape measure?

Blade/Tape The tape, also known as the blade, is what you use to get your measurement. Most tapes feature imperial units (inches) on the top row and metric units (centimeters) on the bottom.

## What’s 1/32 of an inch?

0.03125Decimal equivalents of eights, sixteenths, thirty-seconds and sixty-fourths of an inchInchesfractionaldecimalThirty-seconds1/320.031253/320.0937564 more rows

## How do you measure a third of an inch?

This is an easy one! You lay the ruler at an angle to the line along which you wish to measure, such that 1/2″ on the ruler corresponds to 1/3″ on the baseline. Draw a baseline along which you want to measure 1/3 inch. Lay down the ruler so that 0 is at the origin, and the 3 inch mark is on the perpendicular somewhere.

## What’s after 1 2 on a ruler?

The red marks on these rulers are at 1/8, 1/4, 3/8, 1/2, 5/8, 3/4, 7/8, and 1. The next smallest mark, if there are any, are 1/16ths. The red marks on this ruler are at 1/16, 1/8, 3/16, 1/4, 5/16, 3/8, 7/16, 1/2, 9/16, 5/8, 11/16, 3/4, 13/16, 7/8, 15/16, and 1.

## How do you read a tape?

How to Read a Tape MeasureFind/read the markings. On a standard tape measure, the biggest marking is the inch mark (which generally has the biggest number, if it has them).As the increments decrease, so does the length of the mark. … Read 1 inch. … Read one-half inch. … The remaining markings follow a similar pattern.

## How many sixteenths are in an inch?

16 1/16sThere are 16 1/16s of an inch in one inch. Dividing one by 1/16 gives the answer 16. Dividing fractions requires multiplying the divisor by the reciprocal of the dividend, so dividing one by 1/16 is the same as multiplying one by 16.

## What does 1/8th of an inch look like?

What does 1/8 of an inch look like on a ruler? The 1/8 of an inch marks are the smaller marks found directly in between the 1/4 of an inch marks on the ruler. Between 0 and 1 inch, there are marks that denote 1/8, 1/4 (or 2/8), 3/8, 1/2 (or 4/8), 5/8, 6/8 (or 3/4), 7/8, and 1 (or 8/8) of an inch.

## How do you read measurements?

For example, a window that is 24 inches wide by 30 inches tall would be written as 24″ X 30″. In the manufacturing industry, this standard window size is referred to as a 2030 or 2 feet by 3 feet. In a rectangular swimming pool, the dimension might read 16′ X 30′ X 9′ or 16 feet wide by 30 feet long and 9 feet deep.

## How long is an inch on your finger?

One inch (2.5 cm) is roughly the measurement from the top knuckle on your thumb to your thumb tip. Measure yours to see how close it is to 1 inch.

## How do I know my height?

When your height is measured at the doctor’s office, you usually stand next to a device called a stadiometer. A stadiometer is a long ruler attached to the wall. It has a sliding horizontal headpiece that’s adjusted to rest on top of your head. It’s a quick way of accurately measuring your height.

## Is tape reading still useful?

Tape reading eventually became obsolete in the 1960s and 1970s with the rise of television and computers, but the terms ticker symbol and stock tickers remain in use and traders employ many of the same techniques with more modern technology.

## What fraction is .8 of an inch?

Inch Fraction Conversion Chart – Fraction Decimal and Metric EquivalentsFraction (inches)Decimal (inches)Metric (millimeters)3/32″0.09375″2.38125 mm7/64″0.109375″2.778125 mm1/8″0.125″3.175 mm9/64″0.140625″3.571875 mm60 more rows

## What does 1cm look like?

1 centimeter is equal to 0.3937 inches, or 1 inch is equal to 2.54 centimeters. … In other words, 1 centimeter is less than half as big as an inch, so you need about two-and-a-half centimeters to make one inch.

## How many cm are in a ruler?

30 cmThe standard metric ruler is 30 cm long. Each centimeter is labeled with a number to show the measurement it’s referring to. You might see inches on the other side of your metric ruler. In this case, refer to the instructions above to learn how to read a ruler in inches.

## What is the nearest 1/2 inch?

So its length to the nearest half inch is 0.5 inch only. While measuring to the nearest quarter inch, we think of an inch as being divided into four equal parts each equal to a 14th of an inch. The length of this push pin is closer to 3 quarters than to 4 quarters of an inch.

## How many fingers is 3 inches?

1 in = 0.0254 m (SI base unit). 1 Finger: 1 finger is exactly 7/8 inches….Please share if you found this tool useful:Conversions Table3 Inches to Fingers = 3.428690 Inches to Fingers = 102.857114 more rows

## How many inches is a pinky finger?

Measuring Without Tools, Part 1UnitDescriptionMy MeasurementRing Fingerlength of palm side of ring finger3 inchesThumbdistance from tip of thumb to first knuckle1 inch (to first line on knuckle)Pinkywidth of pinky finger at nail½ inch7 more rows•Aug 9, 2013

## Why are there 16 inches on a tape measure?

Standard US construction practice separates wall studs by 16 inches. Marking these on the tape makes it easier for the carpenter to see the relevant multiples.